A New Product that Blocks TURF Heat to the Feet

John D said:
To answer your question, It is a patent pending blend of materials that are designed to absorb heat and block it from transferring to the insole. It is cut to fit and very thin so it will not change the overall feel of the cleat stock insole.
Click to expand...
What's the patent application number?
 
John D said:
If that’s what you think, no point on arguing a point that was explained in earlier posts.
If you think foil is better then use foil.
Click to expand...

People on this forum (or the preceding fora) have reported using aluminum foil successfully. And if I had to design a cooling system for feet, layers of reflectors and insulators is where I would start (just like the product blurb says).
 
espola said:
People on this forum (or the preceding fora) have reported using aluminum foil successfully. And if I had to design a cooling system for feet, layers of reflectors and insulators is where I would start (just like the product blurb says).
Click to expand...
And I have notified my friend that the marketing company had wording that was incorrect about reflective properties.
I know during the test phases of the product they initially went that route by incorporating reflective materials, after many prototypes it was determined that the use of foils was actually transferring more of the conductive heat from the turf through the bottom of the cleat through Blusol product. There was not enough added benefit of adding foil on the bottom of the sole since it is conductive heat that they are trying to stop/reduce, not the radiation from direct sun light .
 
John D said:
And I have notified my friend that the marketing company had wording that was incorrect about reflective properties.
I know during the test phases of the product they initially went that route by incorporating reflective materials, after many prototypes it was determined that the use of foils was actually transferring more of the conductive heat from the turf through the bottom of the cleat through Blusol product. There was not enough added benefit of adding foil on the bottom of the sole since it is conductive heat that they are trying to stop/reduce, not the radiation from direct sun light .
Click to expand...

Try this --

Take the shelf or shelves out of a toaster oven. Get it good and hot.
Stick your hand or fist in there for a moment to feel the heat.
Pull the hand out and wrap it with a single layer of aluminum foil.
Put the wrapped hand back in the toaster oven.
 
espola said:
Try this --

Take the shelf or shelves out of a toaster oven. Get it good and hot.
Stick your hand or fist in there for a moment to feel the heat.
Pull the hand out and wrap it with a single layer of aluminum foil.
Put the wrapped hand back in the toaster oven.
Click to expand...
And then keep it in for 15 minutes.
 
espola said:
Try this --

Take the shelf or shelves out of a toaster oven. Get it good and hot.
Stick your hand or fist in there for a moment to feel the heat.
Pull the hand out and wrap it with a single layer of aluminum foil.
Put the wrapped hand back in the toaster oven.
Click to expand...

Try touching the rack in the toaster oven with the aluminum foil. Wait, don’t do that, you’ll get burned because aluminum foil is a great conductor of heat...

Foil can provide a barrier from radiation and convection, as you noted, but will conduct. I don’t think it’s more than placebo effect in terms of reducing heat transfer as an insole.
 
overlappingrun said:
Try touching the rack in the toaster oven with the aluminum foil. Wait, don’t do that, you’ll get burned because aluminum foil is a great conductor of heat...

Foil can provide a barrier from radiation and convection, as you noted, but will conduct. I don’t think it’s more than placebo effect in terms of reducing heat transfer as an insole.
Click to expand...

"Take the shelf or shelves out of a toaster oven"
 
espola said:
"Take the shelf or shelves out of a toaster oven"
Click to expand...
I got that, but the point is just that aluminum isn’t going to be great protection if in direct physical contact. It’s a great barrier from say sun or wind, but it won’t protect from touch, just ask your baked potato.

Just my two cents on heat transfer, no idea if this stuff is any better than any other insole.
 
not to hijack the thread...I was interested in hearing about insoles anyways, not talking about heat but support and stiffness, anyone running a new insole in the adidas or Nike cleats, I thought I saw a insole that was extreme stiff , supposed to be extremely comfortable and snappy if that makes sense??
Would you want like doctor schuls or would you want a spiff insole, just curious, thanks
 
I've been told that these work pretty well --

HTB1a97nMVXXXXcMXFXXq6xXFXXXl.jpg
 
overlappingrun said:
I got that, but the point is just that aluminum isn’t going to be great protection if in direct physical contact. It’s a great barrier from say sun or wind, but it won’t protect from touch, just ask your baked potato.

Just my two cents on heat transfer, no idea if this stuff is any better than any other insole.
Click to expand...

Give it up. He'll never give in. You just have to move on.
 
You must log in or register to reply here.
Back
Top